Description
Properly Protects Your Concrete Surface
Use the MasonryDefender Concrete Sealer to fully protect your driveway as well as brightening the appearance.
Protects against cracking and pitting that is caused moisture that seeps into the concrete over time.
After the solution is applied, water will now bead instead of seeping into your driveway causing more damage.
Future maintenance will be much easier. Simply clear off any dirt, pollen, mildew, or leaves with a broom or garden hose.
The surface of your concrete driveway, patio, or sidewalk will now be fully protected from mold, mildew and moisture. No longer waste your time power washing your driveway for hours. Stay fully protected for up to 5 years.
How To Apply The Concrete Sealer
Please make sure that the air and driveway temperature is a minimum of 40°F and a maximum of 100°F for three hours following application.
Once your surface is free and clear of any dirt and debris, use a low pressure pump-up garden sprayer to apply a thin, even layer. The use of a sprayer will allow you to evenly coat your driveway.
The surface should remain wet for 2-3 minutes before final absorption.
Avoid puddling or ponding; brush or broom to spread material until the sealer thoroughly penetrates the surface.
Surface will be dry in 2-6 hours, depending on temperature and humidity. Allow 24 hours before driving on surface.