PCW5000-HK includes the following: PCW5000 portable capstan winch; PCA-0100 hard-sided transport case; PCA-1213M 12mm x 100m double-braid polyester rope; PCA-1256 rope storage bag; 2 PCA-1259 60mm x 2.5m polyester slings; PCA-1261 hitch plate with anchor ; 2 PCA-1274 stainless steel swing side snatch block pulleys; 4 PCA-1276 steel locking carabiners; 1 PCA-1281 safety hook; 1 PCA-1282 grab hook; PCA-1372 10mm x 2.1m HPPE rope choker with steel rod.
PCW5000 Specifications: 4-stroke Honda GX-50cc engine; 57mm diameter capstan drum; 1000 kg single line max. pulling force/2000 kg double line max. pulling force; 12m/min pulling speed; 110:1 gear ratio; minimum rope diameter 10mm/ideal 12 mm/maximum 16mm; continuous work cycle; 1-year commercial warranty and 5-year personal use warranty.
PCW5000 Features: lightweight and portable; constant pulling power; capstan design allows for unlimited rope length because rope does not accumulate on drum; designed for synthetic, polyester rope, which has low stretch properties and is easy to work with; quick-anchoring.
Use the pulleys, slings and carabiners to create a block-and-tackle system to triple your pulling power or redirect your load!
NOTE: Some pictures display equipment in use and may contain components not included in this kit but that are available separately.
PCA-1006 Forestry Accessory Kit for PCW3000 winch includes the following: 1 PCA-1205M 10mm x 50m double-braided poly rope and PCA-1255 bag; 1 PCA-1259 60mm x 2.5m polyester sling; 1 PCA-1275 stainless steel side swing snatch block pulley; 2 PCA-1276 steel locking carabiners; 1 PCA-1282 7mm grab hook ; 1 PCA-1290 skidding cone; and 1 PCA-1295 choker chain with C-hook and steel rod. PCW3000 winch sold separately.
The PCA-1290 skidding cone receives logs up to 50 cm diameter or several small stems attached together using a choker chain and is usable in temperatures down to -22 degrees F (-30 degrees C)! Made of high-performance plastic, the cone is light, flexible, and practically unbreakable. Using a skidding cone prevents logs from colliding with roots, stumps and other obstacles, and its elliptical nose provides solidity and allows it to slide over residual trees, thus avoiding regeneration damage.
Use the PCA-1275 small pulley, carabiners and sling to create a block-and-tackle system to double your pulling capacity or redirect your load!
PCA-1295 plated steel choke chain measures 2.1 m in length without the needle and can be used to go around a tree with a 50 cm diameter while maintaining a sufficient length to thread through the skidding cone. Fitted with C hook for installation, and quick and safe disassembly. The 30 cm steel rod installed at the end of the chain can be easily pushed under the logs and insert into the skidding cones opening.
NOTE: Some pictures display equipment in use and may contain components not included in this kit but that are available separately.